Adding The Product - Epson PP-100AP User Manual

Interface
Display
Other
Note:
❏ ATI South Bridge chip set IPX460 or earlier is incompatible with this product.
❏ Refer to the URLs listed on pages "Help for Users in the United States and Canada" on page
91 and "Help for Users in the Europe (EMEA)" on page 92 for chip sets that are not supported.

Adding the product

Use the EPSON Total Disc Setup to add the product (CD/DVD publisher) to the computer.
Note:
The product must be added when the connection point (port) is set manually. However, the product
does not need to be added when the connection point (port) is set automatically.
1. Make sure that the product is connected to the computer via the USB cable and that the
product is turned on.
2. Select Start (
EPSON Total Disc Maker - EPSON Total Disc Setup.
The EPSON Total Disc Setup will start.
3. Click Add.
4. Select [Local CD/DVD publisher], then click Next.
5. Select the product to be added from CD/DVD Publisher List, then click Next.
6. Enter any name and click OK.
USB 2.0
❏ Compatible with USB 2.0 standard
❏ Ensure Hi-Speed USB performance
XGA (1024 x 768 pixels) or higher
65,536 colors or more
Windows Media Player 6.4 or higher must be installed.
in Windows 7 or Windows Vista) - All Programs (or Programs) -
13
Using Your Software