Handling Ink Cartridges - Epson PP-100AP User Manual

❏ Take care not to spill liquid on the product.
❏ Do not use aerosol products that contain flammable gases inside or around this
product. Doing so may cause fire.
❏ Always turn the product off using the P power button. When this button is pressed, the
power light flashes. Do not unplug the product or turn off the power to the outlet
until the
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head
and may prevent the product from printing.
❏ Be careful not to trap your fingers when closing the disc cover.
❏ The product uses galvanized sheet metal and this may cause rusting at the edges;
however, this does not cause any harm to the function of the product.
❏ Do not place any drink or liquid on the product as penetration by liquid inside the
product will cause a malfunction.
❏ When you have opened the disc cover while running a job (busy indicator is flashing),
make sure that internal light has turned off and that the arm has stopped moving before
performing any operation such as loading or taking out discs. Do not put your hands
inside the product or operate stackers while the arm is moving. Also, open and close
the disc cover gently.
❏ The product cannot be used as a shared printer using the Windows sharing setting.

Handling ink cartridges

Observe the following when handling the ink cartridges:
❏ Keep ink cartridges out of the reach of children. Do not allow children to drink from or
handle the cartridges.
❏ Do not shake ink cartridges; this can cause leakage.
❏ Be careful when you handle used ink cartridges, as there may be some ink remaining
around the ink supply port. If ink gets on your skin, wash the area thoroughly with soap
and water. If ink gets into your eyes, flush them immediately with water. If discomfort or
vision problems remain after a thorough flushing, see a doctor immediately.
❏ Do not remove or tear the label on the cartridge; this can cause leakage.
❏ Install the ink cartridge immediately after you remove it from its package. If you leave a
cartridge unpacked for a long time before using it, normal printing may not be possible.
power light stops flashing.
Important Notice and Safety Instructions
9