Transporting Your Product - Epson PP-100AP User Manual

Note:
❏ You can check the free space of the maintenance box on the printer driver.
& See "Getting Maintenance Information" on page 70.
❏ When it is almost time to replace the maintenance box, a message notifying you that it is almost
time to replace it is displayed once per day when you start up EPSON Total Disc Monitor.
❏ When it is time to replace the maintenance box, all the ink lamps flash rapidly and a message
notifying you that it is time to replace it is displayed on EPSON Total Disc Monitor.
See the instruction manual of the maintenance box for replacing the maintenance box. Be
sure to replace also the filter when you replace the maintenance box.
Caution:
c
❏ When it is time to replace the maintenance box, job processing automatically stops. You
can replace the maintenance box without turning the power off, and then resume job
processing. However, do not move the product or subject it to any impact while
processing a job.
❏ Epson recommends the use of genuine Epson maintenance boxes. The use of
non-genuine maintenance boxes may cause damage that is not covered by Epson's
warranties, and under certain circumstances, may cause erratic product behavior.
❏ Do not use any maintenance box removed from the product and left for a long period.
❏ Do not tilt the used maintenance box. Otherwise ink may leak.
❏ Do not touch the green IC chip on the maintenance box.
❏ Do not touch the ink ejection port of the maintenance box or the inside of the box insertion
opening of the product.
❏ Be careful not to touch the ink on the maintenance box cover and filter cover.
❏ Do not take out/put in the maintenance box more than necessary. Otherwise some parts
of the ink pad may drop inside the product.

Transporting Your Product

If you need to transport your product some distance, carefully prepare and repack it. Be
sure to use the original box and packing materials.
Warning:
w
The product is heavy, so have two people lift the product.
Maintaining Your Product
71