Screen Simulations; Port Identity Examples; Sources For More Information - ProCurve 6400cl Management And Configuration Manual

Getting Started

Sources for More Information

1-4

Screen Simulations

Displayed Text. Figures containing simulated screen text and command
output look like this:
ProCurve> show version
Image stamp: /sw/code/build/info
September 30 2005 13:43:13
E.08.22
139
ProCurve>
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden­
tification. For example:
ProCurve(config)# clear public-key
ProCurve(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile

Port Identity Examples

This guide describes software applicable to both chassis-based and stackable
ProCurve switches. Where port identities are needed in an example, this guide
uses the chassis-based port identity system, such as "A1, "B3-B5", "C7", etc.
However, unless otherwise noted, such examples apply equally to the stack-
able switches, which typically use only numbers, such as "1", "3-5", "15", etc.
for port identities.
Keys
Simulations of actual keys use a bold, sans-serif typeface with square brackets.
For example, the Tab key appears as
Sources for More Information
For additional information about switch operation and features not covered
in this guide, consult the following sources:
■ For information on which product manual to consult on a given software
feature, refer to the chapter "Product Documentation".
[Tab] and the "Y" key appears as [Y] .