Getting Started
Need Only a Quick Start?
1-8
If you need information on specific features in the web browser interface, use
the online help available for the web browser interface. For more information
on web browser Help options, refer to "Online Help for the Web Browser
Interface" on page 5-11.
If you need further information on ProCurve switch technology, visit the
ProCurve Networking web site at:
http://www.procurve.com
Need Only a Quick Start?
IP Addressing
If you just want to give the switch an IP address so that it can communicate
on your network, or if you are not using VLANs, HP recommends that you use
the Switch Setup screen to quickly configure IP addressing. To do so, do one
of the following:
Enter setup at the CLI Manager level prompt.
■
Procurve# setup
■
In the Main Menu of the Menu interface, select
8. Run Setup
For more on using the Switch Setup screen, see the Installation and Getting
Started Guide you received with the switch.