ProCurve 6400cl Management And Configuration Manual page 483

Figure B-19. How To Select a Monitoring Port
5. Use the Space bar to select the port to use for monitoring.
6. Highlight the Monitor field and use the Space bar to select the interfaces
to monitor:
Ports: Use for monitoring ports, static trunks, or the mesh.
VLAN: Use for monitoring a VLAN (5300xl and 4200vl switches).
7. Do one of the following:
• If you are monitoring ports, static trunks, or the mesh, go to step 8.
• If you are monitoring a VLAN on a 5300xl switch:
i. Press
[Tab]
Monitoring and Analyzing Switch Operation
Move the cursor to the Monitoring Port parameter.
Inbound Port and Trunk Monitoring (Only) on the Switch 4108
or the down arrow key to move to the VLAN field.
Interface Monitoring Features
Use the Space bar to
select a VLAN to monitor.
B-25