Set Date/Time - AT&T CL83101 User Manual

Telephone settings
Telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information. You can turn
off the date and time settings of the caller ID service and set the date and
time manually (see Use caller ID to automatically set date and time on
page 25).
After a power failure, the system prompts you to set the date and time.
To set the date and time manually:
1. When the telephone base is in idle mode, press MENU/
main menu.
2. Press q or
CID
then press
MENU
3. Press q or
CID
/SELECT, or enter the number using the
MENU
dialing keys.
4. Press q or
CID
/SELECT, or enter the number using the
MENU
dialing keys.
5. Press q or
CID
/SELECT, or enter the number using the dialing
MENU
keys, then press
the time.
6. Press q or
CID
/SELECT, or enter the number using the dialing keys.
MENU
7. Press q or
CID
enter the number using the dialing keys.
8. Press q or
CID
7 for PM. Then press
tone and the screen returns to the previous menu.
NOTE: If the clock is not set when a message is recorded, the system announces, "Time
and day not set," before it plays the message.
to scroll to >Set date/time and
p
DIR
/SELECT.
p to select the month, then press
DIR
p to select the day, then press
DIR
p to select the year, then press
DIR
/SELECT to move on to set
MENU
p to select the hour, then press
DIR
p to select the minute, then press
DIR
to highlight AM or PM, or press 2 for AM or
p
DIR
/SELECT to confirm. There is a confirmation
MENU
21
to enter the
SELECT
Ringers
>Set date/time
p
q
SET DATE
MM/DD/YY
p
q
SET TIME
HH:MM --
p
q
/SELECT, or
MENU