Call Screening - AT&T CL83101 User Manual

Answering system
Answering system settings

Call screening

Use this feature to choose whether incoming messages can be heard over
the speaker when they are being recorded. If you turn call screening on, you
hear the incoming message. While monitoring an incoming message, you can
answer the call by pressing
/SPEA�ER SPEA�ER on the telephone base.
or
To change the setting:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press q or p
CID
press /SELECT.
MENU
3. Press q or p
CID
press /SELECT.
MENU
/SELECT to select >Call screening.
4. Press
MENU
5. Press q or p
CID
/SELECT to save the setting. You hear a
6. Press
MENU
confirmation tone.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
SELECT
2. Press q or p
CID
press /SELECT.
MENU
3. Press q or p
CID
/SELECT.
press
MENU
4. Press /SELECT to select >Call screening.
MENU
5. Press q or p
CID
/SELECT to save the setting. You hear a
6. Press
MENU
confirmation tone.
NOTE: For more information on call screening, see page 76.
PHONE/
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to choose >On or >Off.
DIR
to enter the main menu.
to scroll to >Answering sys, then
DIR
to scroll to >Ans sys setup, then
DIR
to choose >On or >Off.
DIR
/SPEA�ER SPEA�ER on the handset,
or
FLASH
SELECT
70
Answer ON/OFF
to
>Ans sys setup
p
q
Call screening
>
# of rings
p
q
CALL SCREENING
>On
p
q
Answer ON/OFF
>Ans sys setup
p
q
Call screening
>
# of rings
p
q
CALL SCREENING
>On
p
q