Operating The Dvd Player - JVC AX-THL1 Instructions Manual

Operating the TV and DVD player

Operating the DVD player

7 To set the manufacturer's code
1
Press and hold
Press and hold the button until step 3 is finished.
2
Press ENTER.
3
Press number buttons (1 - 9, 0) to
enter the manufacturer's code (2
digits).
Examples:
For a MAGNAVOX DVD player: Press 0, then 5.
For a PANASONIC DVD player: Press 1, then 0.
* 01 is the initial setting.
JVC 01*
KENWOOD 03, 04
MAGNAVOX 05
MARANTZ 06
MITSUBISHI 07
ONKYO 08, 09
PANASONIC 10
PHILIPS 06
4
Release DVD.
If there is more than one code listed for corresponding
brand, try each one until you enter the correct one.
DVD.
PIONEER 11
PROSCAN 12
RCA 12
SAMSUNG 13
SONY 14
TOSHIBA 05
YAMAHA 15
ZENITH 05, 16
See page 14 for button locations.
7 To operate a DVD player
You can perform the following operations on the DVD
player.
DVD
DVD 3
DVD 8
1 - 9, 0 while pressing
SHIFT
TOP MENU
MENU
2 / 3 / 5 / K
ENTER
4 / x
1 / y
7
AUDIO
SUBTITLE
ZOOM
NOTE
• The operating buttons may differ depending on
manufacturers.
Turn on or off the DVD
player.
Play back a disc.
Pause playback. To release
it, press DVD 3.
Select a desired chapter
number.
Display a DVD top menu.
Display a DVD menu.
Select a DVD menu item.
Enter a DVD menu item.
Skip to the beginning of
next chapter / return to the
beginning of current (or
previous) chapter.
Fast-forward/fast-reverse
search.
Stop playback.
Select the audio language/
audio channel.
Select the subtitle language.
Enlarge the picture.
15