Using The Dvd Player; To Play A Disc - JVC TH-A10 Instructions Manual

Using the DVD player

and

To play a disc

On the front panel
1.
Switch the TV on and display video from this
system.
Set the TV input to video 1 (or video 2 or 3).
2.
Insert the disc.
1 Press 0 *on the center unit to open the disc tray.
Change the playback source to DVD.
2 Place the disc in the tray.
With the playback side (non-label side) down.
To insert an 8 cm disc, place it in the inner recess.
3 Press 0 to close the disc tray.
Playback begins immediately a DVD auto-playback disc is
inserted.
3.
Play the disc.
From the remote controls:
Press DVD.
Change the playback source to DVD. The remote control
enters the DVD mode and playback begins.
Primary remote control
DVD
On the front panel:
Press 3
**.
Change the playback source to DVD. Playback begins.
When 0 on the center unit is pressed while on standby, power
*
is automatically turned on and the disc tray ejected.
** When 3 on the center unit is pressed while on standby, power
is automatically turned on, and playback begins, if a disc is in
the tray.
DVD is selected as the playback source if there is no disc in the
tray.
22
represent disc types.
3
Secondary remote control
DVD
Notes:
• The unit can playback DVD VIDEO, Audio CD, and Video CD
discs only. Do not load other disc types.
For details about playable disc types, see page 5.
• When loading a disc in the tray, be sure to position the disc inside
the recess. Otherwise, the disc may be damaged when the tray is
closed, and the disc may not be removed form the unit.
• Playback begins automatically with some discs.
• DVD or video CDs recorded with PBC (playback control),
pressing PLAY may display the menu on the TV screen. You may
2
select items from the menu screen thus displayed and call up the
locations to be viewed (see pages 24 and 25 for details).
• You can also open and close the disc tray from the opening on-
screen display.
Use CURSOR 5/∞ to move pointer to ), then press ENTER to
open or close the disc tray.
• Discs may be played back from the on-screen menu.
Use the CURSOR 5/∞, move the pointer to #, and press ENTER
to begin playback.
To stop playback competely
From the remote controls: Press STOP.
On the front panel: Press 7.
Display when a disc is inserted —————————
When a DVD is inserted
Display window:
"READING"="DVD"
When a video CD has been inserted
Display window:
"READING"="VCD 12 48:12"
(total number of tracks and total time display)
« +After 4 seconds
"VCD 1 4:12"
(first track time)
When an audio CD has been inserted
Display window:
"READING"="CD 12 48:12"
(total number of tracks and total time display)
« +After 4 seconds
"CD 1 4:12"
(first track time)
Opening on-screen:
Opening on-screen:
Opening on-screen: