Table of Contents
Advertisement
10. To install the adapter cable and connect the navigation radio
0
0
A4
30
0
0
Retrofit / Installation kit No. 65 90 0 027 973 (others see cover sheet)
Installation Instructions No. 01 29 0 140 447
30
1
039 0018 B
4
3
039 0019 B
Issue date: 06.2001
Carefully slide the connected navigation radio (1)
0
into the radio shaft (30) and secure it with the
existing slides.
Refer to the information for securing the
navigation radio in the operating instructions
in the section headed Installation/Removal
instructions.
As you slide in the navigation radio, ensure
that you do not jam or damage any of the
cables.
0
The figure shows the bottom right A pillar (the
light module has been unscrewed).
Connect branch A4, open cable end, blue/yellow
cable, to the reversing light cable (30), white/
yellow cable (PIN 10) using a double insulation-
piercing connector and secure it with cable ties (4).
Since there are several white/yellow cables, check
the reversing light signal.
0
0
EN/14
Hide quick links:
Advertisement
Table of Contents
