BMW E39 Installation Instructions Manual page 13

10. To install the adapter cable and connect the navigation radio
0
A1+30
0
A1+30
0
1
30
0
32
A2
31
A3
Retrofit / Installation kit No. 65 90 0 027 973 (others see cover sheet)
Installation Instructions No. 01 29 0 140 447
8
8
039 0014 B
B
B2
039 0015 B
2
039 0016 B
B1
1
039 0017 B
Issue date: 06.2001
Affix a rattle guard (8) to the second rattle guard (8)
0
and then affix them to the wiring harness so that
the plug connector A1 + new generation (30) is
wrapped in them.
0
Lay the wrapped plug connector A1 and new
generation (30) on the left behind the
instrument panel so as to enable you to
install the navigation radio.
Connect branch B2, coaxial Fakra plug casing on
the adapter B to the existing aerial cable (30).
Screw the radio retaining pin (2) on to the stud bolt
0
(30) on the navigation radio (1).
Connect branch A2, black 16-pin socket casing,
0
to the navigation radio (1).
Connect branch A3, red 20-pin socket casing, to
the navigation radio (1).
Connect branch B1 to the radio aerial input.
Connect the coaxial plug (31) on the GPS aerial
cable (32) to the navigation radio (1).
EN/13