Instant/Panic; Event Settings; Sensor; Motion - LG LRD5160 Series Owner's Manual

Instant/Panic

Settings concerning instant/panic recording.
• CH: Displays the channel number.
• Resolution: Selects the recording resolution.
• Quality: Selects the recording picture quality
• Frame Rate: Selects the frame rate. The frame rate is the number
of recorded frames per second. According to resolution, the
frame rate is set automatically.
NOTE
Instant is single-channel setting and Panic is multi-channel setting.

Event settings

Sensor

• In: Displays the number of the ALARM-IN terminal.
• Sensor Type: The sensor state can be set to either N.O. (Normally
Open) or N.C. (Normally Closed).
• Camera: Select the camera channel connected to the ALARM-IN
terminal.
• Relay Output: Select the alarm (relay) output number for the
RELAY-OUT terminal for the output alarm (relay) signal.
• Preset: Select the preset number. When the input is activated,
the camera moves to the selected preset position and the
picture of the camera in that position appears on the monitor.

Motion

• Channel: Select the channel to set motion detection.
• Sensitivity: Set the level of sensitivity for the created motion
detection area. Sensitivity can be set from level 1 to 10 or OFF.
• Relay Output: Select the number of the RELAY-OUT terminal for
the output alarm (relay) signal when motion is detected.
• Area: Select the desired motion detection area on the preview
window screen.
- w/s/a/d: Moves the yellow cell box to another cell
zone.
- OK: Selects or cancels the motion detection area at the
current cell position.
- Press BACK to exit the settings.
Installation 37
3