LG LRD5160 Series Owner's Manual page 62

62 LG Network Client Program
Motion Settings
• Sensitivity: Set the sensitivity level for the created motion
detection area.
• Relay Output: Select the number of the RELAY-OUT terminal for
the output alarm (relay) signal when motion is detected.
• Area: The factory default of the Motion detection area is set as
the whole area. You can change the area by using mouse on the
preview window screen.
-
Select All: Click one point with the left mouse button and
drag & drop to the end point.
-
Clear All : Click the start point with the right mouse button
and drag & drop to the end point.
NOTE
• If you want to display the grid, mark up the [Show Grid]
option.
• If you want to select the entire area, click the [Set All] button
or click the [Clear All] button to cancel the selected area.
Sequence
You can view all the channels in sequence in the selected screen
division mode. While the sequence mode condition, if you change
the screen division mode, the sequence function will be canceled.
5
• Main Dwell Time: Selects the channel sequence time for main
monitor.
• Spot Dwell Time: Selects the channel sequence time for spot
monitor.
OSD
• Channel Name: Mark up to displays or removes the channel
name in the channel window.
• Channel FPS: Mark up to displays or removes the channel FPS
(Frame Per Seconds) in the channel window.
• Channel Status: Mark up to displays or removes the channel
status in the channel window.
• Font Size: Selects the font size of characters such as the channel
name and playback time which displayed on the channel
window.
• Position: Selects the position of characters such as the channel
name and playback time which displayed on the channel
window.
Record settings
1. Select a day of the week.
2. Mark up the desired recording option.
• N : No schedule recording.
• C (Continuous recording): Recording starts automatically
from the preset time.
• S (Sensor event recording): Recording starts automatically
when the sensor alarm occurs within a designated time.
• M (Motion event recording): Recording starts automatically
when motion is detected within a designated time.
• T (Text event recording): Recording starts automatically
when text input is detected within a designated time.
• S+M (Sensor+Motion recording): Recording starts
automatically when the sensor alarm signal has been input
or motion has been detected.
• C+S (Continuous+Sensor event recording): Recording starts
automatically from the preset time. When the sensor alarm
occurs within a designated time, changes the continuous
recording mode to sensor event recording mode and
recording starts automatically.
• C+M (Continuous+Motion event recording): Recording
starts automatically from the preset time. When the
motion is detected within a designated time, changes the
continuous recording mode to motion event recording
mode and recording starts automatically.
• C+T (Continuous+Text event recording): Recording starts
automatically from the preset time. When the text input
occurs within a designated time, changes the continuous
recording mode to text event recording mode and
recording starts automatically.
• C+S+M (Continuous+Sensor+Motion event recording):
Recording starts automatically from the preset time. When
the sensor alarm signal has been input or motion has
been detected, changes the continuous recording mode
to motion event recording mode and recording starts
automatically.
• S+M+T (Sensor+Motion+Text event recording): When
the sensor alarm signal has been input, motion has been
detected or the text input occurs and then recording starts
automatically.
• C+S+M+T (Continuous+Sensor+Motion+Text event
recording): Recording starts automatically from the preset
time. When the sensor alarm signal has been input, motion
has been detected or the text input occurs within a
designated time, changes the continuous recording mode
to occurred event recording mode and recording starts