Provide Adequate And Redundant Sources Of Power; Remove Product From Packaging - HP 4400 Enterprise Installation Manual

Provide adequate and redundant sources of power

Make sure that you have two high-line power feeds installed near your computer. These two power
sources usually come from the same external power grid, but occasionally may originate from
different grids or even entirely different sources.
For protection against a power-source failure, obtain and include two uninterruptible power supplies
in your installation.
For power consumption specifications, see the QuickSpecs document at:
http://www.hp.com/go/eva4400

Remove product from packaging

1. Remove product from boxes.
2. Verify that contents match your expectations and site requirements.
EVA4400 controller enclosure should contain:
◦
◦
◦
◦
◦
◦
Each FC disk shelf should contain:
◦
◦
◦
◦
3. Inspect for damage.
If damage is present, contact your local HP representative.
One 2U controller enclosure with two HSV300 or HSV300–S controller modules,
two power supply modules, two fan modules, and two battery modules installed.
Rack mounting hardware
Two 2.0 meter FC copper cables
Two power cords
Installation documentation
XCS controller software recovery CD
One 2U M6412 disk enclosure, two power supply modules, two fan modules, and
two battery modules.
Rack mounting hardware kit
Two 0.41 meter FC copper cables
Two power cords
Provide adequate and redundant sources of power 9