Table of Contents
Advertisement
MONITOR
In this section of the console, the operator chooses what to listen to,
and controls the listening level.
5
3
4
2
1
There is a small TALKBACK microphone built in to the top right corner
of the console, and it has a level controller. The TALKBACK on/off
switch is located directly below the CONTROL ROOM LEVEL pot. To
route TALKBACK to different outputs, access the TALKBACK display
in the MONITOR menu:
19 02R96-v2 Quick Start Guide
1. The CONTROL ROOM LEVEL adjusts the
main listening level. The DIMMER switch can
quickly dim the speakers by 20dB or so.
2. The CONTROL ROOM switches choose what
to listen to in the Control Room monitors, (and in
the headphones).
3. The STUDIO switches choose what to listen to
in the Studio monitors. Pressing the CONTROL
ROOM switch will route the Control Room signal
also to the Studio.
4. The SOLO CLEAR switch will switch off the
SOLO switches for all channels.
5. The MONITOR DISPLAY switch accesses the
many extra monitor functions on the LCD.
Advertisement
Table of Contents
