Using The Selected Channel Controls - Yamaha 02R96-v2 Quick Start Manual

Using the SELECTED CHANNEL controls

When a channel is selected, its settings can be seen and controlled in
the SELECTED CHANNEL area. The currently selected channel's
name and number is always shown in the top-right corner of the LCD
screen.
EQUALIZER
When one of the EQ controls is moved, the LCD will show the EQ edit
screen. There are 4 parametric bands. To change between controlling
FREQUENCY and Q, press down quickly on the encoder. Note that
the LOW band can be a Low Shelf or a HPF by changing the Q to the
maximum or minimum position. In the same way, the HIGH band can
be a High Shelf or a LPF. There are 2 types of EQ (TYPE I or TYPE II),
with slightly different sound characteristics. The ATT function is an
attenuator, or digital trim to adjust the channel level pre-eq.
8 02R96-v2 Quick Start Guide