Quick Start - Aetertek AT-216F Owner's Manual

Quick Start

6
Step 6 Receiver self-exams
Short press the power button of the receiver by three times,
the receiver will Beep , Vibrate and Shock by one time .
A
The emission signal covers the front yard
C
The emission signal covers the right side
Step 7 Place the master controller
The master controller should be placed somewhere that
will send the signals within the desirable zone
Start to train:
Put the collar into the receiver, wear the receiver around dog's neck, leave one finger place between the collar and the neck, then it's
ready to train.
-06-
AT-216F(2013.01.19) _A1
2013 1 21 11:37:15
7
B
The emission signal covers the left yard
D
The emission signal cover the back yard
8
Detect the strength of Mark the place when the red
the signals LED light flashes
Step 8 Test the signals and mark the border to set the wireless fence
9
Step 9 Train your pet to understand the warnings and stay inside
the control zone
After certain training by leash or remote control training system
with beep/vibration/shock mode, your dog/cat will associate
the signs(flags) with the the signals(beeps,vibration or shocks).
They will learn to better stay away from the flags. Otherwise
the unpleasant stimulous(vibration/shocks) will follow.
Very Important Note:
The signal maybe influenced by surroundings, weather or other wireless,
so t he boundary should be observed and adjusted slitely now and then.
The flags marks the border