Related Manuals for Aetertek AT-216C
Summary of Contents for Aetertek AT-216C
- Page 1 Owner’s Manual for Professional Remote Dog Trainer AT-216C 550 Meters AT-216C www.aetertek.com...
-
Page 2: Table Of Contents
System Components------------- ----------------------------1 Quick Start--------------------------------------------------------2,3 Trouble Shooting----------------------------------------------- 4,5 Training Tips--------------------------------------------------6 Safety Guide---------------------------------------------------7 Information on Terms of Use & Limitation of Liability--------8 Warranty Card--------------------------------------------------9,10... - Page 3 AT-216C System Components Professional Dog Trainer AT-216C Transmitter Antenna Receiver prongs Test Kit Collar Charger Antenna Transmitter Receiver prongs Charge Collar Test Kit -01-...
-
Page 4: Quick Start
Quick Start Step 4: Step 1: Screw the Charge the receiver. The RED LED light of the receiver will be on while the antenna tightly onto receiver is charging. When the receiver is the transmitter. fully charged, the BLUE LED will be on. Once you unplug the charger, the RED LED light will stay solid on-waiting for sync. - Page 5 Quick Start Tip 3:After 1 minute of inactivity, transmitter will go into sleep mode. Up button You can wake it up by pressing any function keys. Down button Shock button Tip 4: The duration for pressing the vibrate or shock button will Vibrate button lead to difference on the length of the vibration or shock time.
-
Page 6: Trouble Shooting
1：Make sure the charger and Transmitter/Receiver are securely connected. Professional Dog Trainer 2：Charge the Transmitter/Receiver for 3 hours or above. AT-216C B：The Transmitter doesn't work. 1: Replace the 9v dry battery with a new one or recharge the Transmitter. 2: For 919C and 216C, you can check whether you can lock the transmitter. If yes, you can unlock it by pushing both buttons on the right side. - Page 7 K：When buying individual Receiver or Transmitter, why do I need to double-check the version? Aetertek updated all machine frequency from 433.92 MHz to 915 MHz, so every time you need to buy individual Receiver or Transmitter, you must know the frequency you actually need; otherwise they will not be compatible.
-
Page 8: Training Tips
Do not rely on this product solely to train your dog. Some dogs will not respond to this product. Aetertek cannot guarantee the effectiveness of this or any trainer on your dog. -
Page 9: Safety Guide
Feature; otherwise it will violate warranty rules. Professional Dog Trainer AT-216C 2. In order to guarantee submersible feature, the waterproof rubber charging lid should be plugged in tightly. 3. Only use the supplied adaptor to charge the receiver, otherwise the receiver will probably be damaged. -
Page 10: Information On Terms Of Use & Limitation Of Liability
4.Limitation of Liability In no event shall Aetertek be liable for any direct, indirect, punitive, incidental, special or consequential damages, or any damages whatsoever arising out of or connected with the use or misuse of this product. Buyer assumes all risks and liability from the use of this product. -
Page 11: Warranty Card
Warranty Card Thank you for purchasing our dog trainer, one of the best training systems available for training your dog. Aetertek warrants the product to be free from defects in material and workmanship, arising under normal use for a period of 6 months from the date of original purchase when brand new. - Page 12 If not listed above, please state here: As agreed by related parts, the seller is responsible for after-sale service, and Aetertek only provides technical support. So if you have any problems related to quality warranty, please contact the seller. We reserve the rights to alter or cancel the warranty procedure at any time without prior notice.
Need help?
Do you have a question about the AT-216C and is the answer not in the manual?
Questions and answers