3. When the front edge of the keyboard is housed firmly, gently press the keys with your fingers and slide
the keyboard toward you until the keyboard is in place.
4. Secure the keyboard by tightening the screws from the bottom side of the computer.
1080 Keyboard bezel assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 56
•
"1020 Bottom slot cover" on page 57
•
"1040 Hard disk drive or solid-state drive assembly" on page 59
•
"1070 Keyboard" on page 64
.
Chapter 9
Removing or replacing a FRU
67