The Ss Command; The Time Command; The Tuner Command - X-Digital System XDS PRO1 User Manual

4.2.16 The SS Command

This command displays the current status of the receiver in the form a list of current
faults which are affecting the receiver. There are no options for this command. Below is a
table which will help to interpret the binary code given by the receiver:
Error Value
0x00000001 FPGA Load Error
0x00000002 DSP Load Error
0x00000004 DSP Ethernet Down
0x00000008 Storage Device Error
0x00000010 Tuner Not Locked
0x00000020
0x00000040
0x00000080
0x00000100
0x00000200
0x00000400
0x00000800
0x00001000 NV Config. Bad
0x00002000
0x00004000 DSP Timeout
0x00008000
The SS command is available to all profiles.

4.2.17 The TIME Command

This command deals with displaying and setting the internal clock of the receiver.
Simply typing TIME without any option will display the time according to the receiver.
Time is synchronized automatically with the satellite. Your timezone may be set from
the Affiliate webpage.
The TIME command is available to all profiles.

4.2.18 The TUNER Command

This command is used to view and modify all of the receiver's tuner settings. Typing this
command without any options will display a useful usage message. Type this command
followed by one of these options/argument combinations to view or modify tuner
settings:
Option Argument
SHOW
SET ,[kHz],[sps]
LNB ,[kHz]
XDS PRO1 Receiver User's Guide
X-Digital Systems
Rev A - August 29, 2009
Error Name
reserved
reserved
reserved
I2C Failure
reserved
reserved
reserved
reserved
Fan Stopped
Table 3. SS and SF Error Code Values
Shows various technical data regarding the specified port.
Sets the tuners radio frequency to [kHz] and the tuner's
Sets the tuner's LNB offset to [kHz].
Error Value
0x00010000
0x00020000
0x00040000
0x00080000
0x00100000
0x00200000
0x00400000
0x00800000
0x01000000
0x02000000
0x04000000
0x08000000
0x10000000
0x20000000
0x40000000
0x80000000
Action
symbol rate to [sps].
23
Error Name
Recorder Overflow
Temperature Warning
Temperature Critical
reserved
CF Needs Repair
reserved
File Delivery Fault
LNB Over-current
CF Offline
reserved
SDL Ignored
URL Event Overflow
Internet Down
Storage Full
SW Download Ready
SW Download Error