HP 1910 Getting Started Manual page 34

BOOT
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 7 Boot menu options
Item
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
NOTE:
The system by default has no Boot ROM password. HP recommends that you set a Boot ROM password
immediately after you access the Boot menu.
If you perform no operation or press any key other than Ctrl + B within one second, the system
•
automatically starts up when the remaining time becomes zero, and displays the following
information:
Starting to get the main application file--flash:/V1910-CMW520-A1101.bin!......
.................................................................
The main application file is self-decompressing................................
...............................................................................
..............................Done!
System is starting...
MENU
Description
Download a system software image file to the Flash memory.
Select the system software image file to boot.
Display all files in the Flash memory.
Delete files from the Flash memory.
Modify the Boot ROM password.
Access the Boot ROM update menu.
Start the switch with the factory default configuration. This is a
one-time operation and does not take effect at the next reboot. You
use this option when you forget the console login password.
Disable or enable the Boot ROM password recovery function. By
default, Boot ROM recovery is enabled. You can disable this function
to protect system security.
Set the startup mode to full mode or fast mode, as described in
"Changing the startup
Restart the switch.
30
mode."