Table of Contents
Advertisement
Software upgrades can be accomplished in two (2) different ways:
1. The latest software version for your System is available in module
form.
To take advantage of this effortless upgrade simply:
a. Order part number 252-NOMAD2-PM (Software Module / Update
Module). You pay only shipping. We will charge you freight one way and we
will include a pre-paid UPS Return Tag for the return of the module. (Note:
The Module must be returned to MotoSAT™ within 30 days, or your Credit
Card will be billed the cost of a replacement module.)
b. Updating the software using the Software Module / Update Module
can be done in less than 5 minutes. It comes with installation instructions.
All you do is plug it into the Serial Port on the back of the NOMAD (see page
5) and follow the instructions listed on the device when it arrives.
2. The latest software version for your system is available online:
http://www.MotoSAT.com/downloads/tv/index.asp.
To load upgrades into your NOMAD via your computer, you must purchase
a MotoSAT™ 15-pin to 9-pin serial cable (part number 406-D15M-SER-D9F).
Call our Technical Support Line (800) 247-7486 to order this cable if you
wish to upgrade via computer. You must also have a computer that has a
serial port available, or have a computer that has a USB port available and a
USB-to-Serial Adapter, which can be purchased from an Electronics Store.
SOFTWARE UPGRADE OPTIONS
Serial Port
A Software Module / Update Module,
or SMUM (left). This module is used
to load firmware revisions into the
NOMAD via the serial port on the
Controller's rear panel (see above.)
23
Hide quick links:
Advertisement
Table of Contents
