Parts Included With Your System; Nomad Specifications; Systems Compatible With The Nomad - MotoSAT Nomad 2 Owner's Manual

PARTS INCLUDED WITH YOUR SYSTEM

Along with the Mount, your MotoSAT™ system should have shipped
with the following components:
1. - (1) 30' co-axial cable, 1-ended (female)
2. - (1) Female coaxial connector
3. - (1) 20" coaxial cable, 2-ended (female)
4. - (1) Clamshell
5. - (2) Scotch-Lok Quick Connectors*
©
6. - (1) NOMAD Owner's Guide
1.
2.
3.
4.
5*.
*Only required or
included with the
MotoSAT™ HD Series.
CONTROLLER VERSION SPECIFICATIONS
Effective August 2008, open-faced systems began shipping with Nomad 3 Universal Con-
trollers. However, the information contained in this Owner's Guide applies to both the No-
mad 3 and to the older NOMAD 2 Controllers. Both Nomad models are shown throughout
this Guide for illustrative purposes, and all controls, connections, installation procedures
and operations are identical between the NOMAD 2 and the Nomad 3.
NOMAD UNIVERSAL CONTROLLER SPECIFICATIONS
INTERFACE: Three-Button
Power / Find / Stow
TUNER: DVB [Digital Video Broadcast] Tuner
Your NOMAD Controller is
compatible with these skewing
and non-skewing MotoSAT™
antenna systems.
7. - (1) 12VDC 4AMP Power Supply with Wall
8. - (1) 30' Control Cable, 1-ended
9. - (1) 9-conductor color-coded connector
10. - (1) NOMAD Universal Controller
10.
6.
DIMENSIONS: 10" L x 7" W x 1.25" H
WEIGHT: 2.5 lbs.
CONTROLLER VOLTAGE: 12VDC 4 AMP
MD500
MD1000.2
MSC-60
MHDTV
HD-SL5
HD-DP3
HD-SC2
Cord
(9-conductor female Twist-Lock)
SKEWABLE NON-SKEWABLE
EXECUTIVE 18" / 24"
8.
9.
7.
3