MotoSAT Nomad 2 Owner's Manual page 26

3. Choose the port you wish to use to
connect to your NOMAD. Generally, COM 1 is
the best choice.
4. Enter properties for COM 1:
- Bits Per Second: 115200
- Data Bits: 8
- Parity: None
- Stop Bits: 1
- Flow Control: Xon / Xoff
Click "OK".
5. In the HyperTerminal window, click FILE
> PROPERTIES > SETTINGS. Click the ASCII
SETUP button. Change the LINE DELAY
setting from 0 to 100.
25