Polk audio loudspeakers quick start guide (28 pages)
Summary of Contents for Polk Audio LC60i
Page 1
LC60i LC80i LC65i LC265i O w n e r ’s M a n u a l High Performance In-Wall Speakers t h e s p e a k e r s p e c i a l i s t s...
Page 2
• Timbre-matched to Polk Audio’s LSi Series Ultra High Performance Loudspeakers. • Rectangular models feature Polk’s patented Power Port (designed in) for extended deep bass response, improved bass efficiency and definition.
PLACEMENT OPTIONS ADJUSTING THE TWEETER Polk Audio LCi Series In-Wall Loudspeakers Aiming the tweeter toward your listening give you nearly endless placement options. position improves imaging and detail. When But remember that placement choice for your using LCi Series In-Wall Loudspeakers as...
Page 4
DIRECTING THE DRIVER (LCi60 & LCi 80) PERFORMANCE ENCLOSURES Are available for all models. These are engi- The fixed 15° angled driver in the ceiling neered enclosures that mount in the wall or speaker allows you to direct the midrange ceiling to maximize the bass and midrange towards your listening area when used for performance of your LCi Speakers.
LC265i, LC65i, LC80i & LC60i MODEL be overly “bright” and unnatural. Engaging ADJUSTMENTS: the LCi Tweeter Attenuation feature (by selecting the “Cut”...
Page 6
LC80I & LC60I MODEL ADJUSTMENTS: Area Targeting — Round LCi models feature a swiveling Ring Radiator Tweeter speaker for better directionality. The “sweet spot” is within a 30º cone of sound coming from the aimed speaker. The round model LCi Loudspeakers feature an innovative Area Targeting Switch.
PAINTING YOUR LCI SERIES IN-WALL PREPARING TO PAINT: LOUDSPEAKERS 1. Separate the parts of the speaker. If the You will need: speaker is not yet installed, the grille can be removed simply by pushing the clamp • Paint of your choice (to make the job easi- screws forward to push the grille off the er, we recommend spray painting the grille) speaker from the inside.
PAINTING THE FRAME: 1. Apply paint to exposed (unmasked parts). 3. After removing the grille by carefully hook- Use two or more thin coats. Spray painting ing it with a bent paper clip and pulling it is recommended [figure 8]. gently away from the frame, spray on two thin coats of finish color.
Wiring is best performed by an expe- rienced professional. If you are in doubt that you possess the necessary skills or tools, TEMPLATE consult your Polk Audio dealer, or a profes- sional installer. FIGURE 10b Rectangular Template: Trace around the template.
Page 10
FOLLOW THESE EASY STEPS: • Carefully cut the hole with the appropriate • Make sure the material into which you plan to mount the speakers (plaster, drywall, cutting tool for your wall or ceiling material. paneling, stone, etc.) can support the Start the hole by drilling a hole on the inside weight of the speakers (see specification of the tracing (with the drill bit touching the...
Page 11
• To install the speaker, first carefully remove • Carefully reinstall the grille by fitting it into the grille using a straightened paperclip or its recess so that it is just resting on the other pointed metal tool. Insert the point frame.
SAFETY FIRST When installing your LCi Series In-Wall If you plan to install your LCi Series speakers Loudspeakers, be aware of the weight of your where water will directly contact them, it is particular model (see specification page for advisable to use a silicone sealant or caulk the weight of your model) and the sturdiness between the frame of the speaker and the of the material into which you are installing...
SPECIFICATIONS LC60i LC80i Frequency Response 30Hz-27kHz 30Hz-27kHz Freq. Response -3dB Limit 45Hz-26kHz 45Hz-26kHz Recommended Power 10-125Wrms 10-125Wrms Impedance 4 Ohms 4 Ohms Efficiency (dB 1w/1m) 90db 90db Drive Unit Complement Mid-Bass 1–6 1/2" (16.5cm) 1–8" (20.3cm) aerated polypropylene mineral filled...
Page 14
All replaced parts and in such countries. “Polk Audio,” “Polk,” “The Speaker Specialists,” “Power Port” and “Dynamic Balance” are trademarks of Britannia Investment Corporation used under license by Polk Audio Incorporated. Dolby, Pro Logic, Dolby Digital and AC-3 are trademarks of Dolby Laboratories Licensing Corp.
Page 15
F o r C u s t o m e r S e r v i c e , c a l l 8 0 0 - 3 7 7 - 7 6 5 5 .
Page 16
t h e s p e a k e r s p e c i a l i s t s ® 5601 METRO DRIVE, BALTIMORE, MARYLAND 21215, USA, 800-377-7655, FAX: 410-764-5266 www.polkaudio.com RM0566-2...
Need help?
Do you have a question about the LC60i and is the answer not in the manual?
Questions and answers