Download Print this page

Polk Audio LC265I-IP Cutsheet

Ultra high performance in-wall/ in-ceiling loudspeakers
Hide thumbs Also See for LC265I-IP:

Advertisement

Quick Links

THIS DOCUMENT APPLIES TO LC265i-IP AND LC80i-IP PRODUCTS
Cutsheet for LC265 -IP/LC80 -IP
World's First Active High Performance IP Addressable Loudspeakers
Polk Audio LCi-IP Ultra High Performance In-Wall/ In-Ceiling Loudspeakers are the world's first active Internet Protocol-ready Loud-
speakers. They were created for IP networked systems (such as the ground-breaking NetStreams
amplifiers eliminate remote amplifiers connected via hundreds of feet of performance-robbing speaker wires. The built-in Digital
Signal Processor (DSP) and supplied Room Correction Software (the Performance Optimization Wizard
to be optimized for maximum performance in any room. While the LCi-IP Series provides the greatest functionality when used
within an IP-based system, these speakers are also compatible with any analog distributed audio system.
LC265 -IP Hardware (included)
• One LC265i-IP speaker
• Performance Optimization Wizard – CD-ROM
• Euro-style (Phoenix) power supply connector
• Mounting template
• Paint mask
• Weather-resistant aluminum grille
and stainless steel hardware
• LCi-IP manual
• Laminated configuration setup card
• Registration card
Note: If you are setting up LCi-IP speakers to be controlled via an
IP-network such as NetStreams
is sold separately, from NewStreams
one pair of speakers.
Important Note: If anything is missing or damaged, or if your LCi-IP speaker
fails to operate, notify Polk Audio Installer Support Services immediately at
800-377-7655. Hours: Mon-Fri, 9am - 5:30pm EST.
Accessories (not included)
• Performance Enclosure for exact volume enclosure performance
in pre-build installations. Improves bass performance and
sound isolation. Model number: ENCL265.
• Speaker-level-to-line-level transformer, such as the PAC SNI-35.
(For analog installations only. Powers up to 2 each LC265i-IP speakers.)
• SPS-1 Power Supply (a power supply is required).
LC265 -IP Performance Enclosure Dimensions
55 5/8" H x 14" W x 3 3/8" D (141.3cm x 35.6cm x 8.6cm)
Digilinx
, purchase a network card, which
. The network card will control up to
Cutout
Dimension
19 1/4"
(48.9 cm)
/
w w w . P o l k A u d i o . c o m
8 0 0 . 3 7 7 . 7 6 5 5 ( U S A & C a n a d a )
DigiLinx
system). Integrated digital
) enable every LCi-IP speaker
Cutout
Dimension
7 1/4"
(18.4 cm)
LC265 -IP Dimensions
Overall Height
20 7/8" (55.5cm)
Overall Width
8 1/2" (30.4cm)
Available Finish: Paintable White
/
4 1 0 . 3 5 8 . 3 6 0 0 ( W o r l d w i d e )
Total
Depth
3 9/16"
(9.1 cm)
1

Advertisement

loading

Summary of Contents for Polk Audio LC265I-IP

  • Page 1 Cutsheet for LC265 -IP/LC80 -IP World’s First Active High Performance IP Addressable Loudspeakers Polk Audio LCi-IP Ultra High Performance In-Wall/ In-Ceiling Loudspeakers are the world’s first active Internet Protocol-ready Loud- speakers. They were created for IP networked systems (such as the ground-breaking NetStreams amplifiers eliminate remote amplifiers connected via hundreds of feet of performance-robbing speaker wires.
  • Page 2: Power Supply

    • SPS-1 Power Supply (a power supply is required). Power Supply The SPS-1 power supply was specifically designed to produce clean, reliable power to ensure that all Polk Audio LCi-IP loudspeakers perform to their maximum capabilities. All output connectors are protected against short circuit and over current.
  • Page 3 LC265 -IP Specifications P E R F O R M A N C E OVERALL FREQ. RESPONSE FREQ. RESPONSE -3DB LIMIT ANALOG AUDIO SIGNAL VOLTAGE INPUT (LINE-LEVEL) FULL OUTPUT AMPLIFIER SNR FIRMWARE UPGRADABLE MID-BASS DRIVER 1–6.5"(16.5CM) MINERAL POLYPROPYLENE WOOFER PROPYLENE CONE WITH 1.5" VOICE COIL TWEETER 1"...
  • Page 4: Amplifier Connections

    Polk Audio provides the Performance Optimization Wizard on CD-ROM. This program enables you to optimize the perform- ance characteristics of Polk Audio LCi-IP speakers specifically to their location in a given room and to the physical characteristics of that room. You can also download the Performance Optimization Wizard from our website (www.polkaudio.com/downloads/po-wizard.exe ).

This manual is also suitable for:

Lc80i-ip