Lsi series center channel loudspeaker surround fx loudspeaker (8 pages)
Summary of Contents for Polk Audio LC265i-IP
Page 1
LC80i- LC265i- Active In-Wall/In-Ceiling Speakers Owner’s Manual...
Page 2
Optimization Wizard enables every LCi-IP speaker to be set up for maximum performance in any room environ- Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com ment. What’s more, LCi-IP speakers already come with an •...
Page 3
Control when used with Speaker 4a or 4b) Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com Cable runs up to 100 feet should have a capacitance INSTALLING THE of 20pF/ft. For cable runs greater than 100 ft. call NETWORK DECODER CARD Customer Serivce at 1-800-377-7655.
“skip question” box. When an “skip question” box is checked, no error message is displayed (figure 4). Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com INTERPRETING THE LEDS FAQs An LED indicator tells you the status...
Wrong or inaccurate values have been entered into the Performance Optimization Wizard. Performance Optimization Wizard is malfunctioning. Audio source is of bad quality. Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com TROUBLESHOOTING CONTINUED Problem Solution No LED Make sure that the speaker is connected to the audio source using RCA cables or a RJ45 equipped Cat-5 cable.
Page 6
(reversing steps 1, 2 & 3). two standoff screws into the two metal standoffs. Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com Remove the (4) Torx screws (size T-10) holding the heat sink to the amp housing.
Page 7
CHANNEL 2 CHANNEL 2 NETWORK IN NETWORK IN COMM COMM CONTROL CHANNEL Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com OPTIONAL CONTROL CHANNEL Hookup CHANNEL 1 CHANNEL 1 CHANNEL 2 CHANNEL 2...
NETWORK IN NETWORK IN COMM COMM CONTROL CHANNEL Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com CONTROL CHANNEL CENTER CHANNEL Hookup 5a: ANALOG (Independent Control When Used with Hookup 3a or 3b)
Page 9
This hookup works for both the LC265i-IP and the LC80i-IP. This hookup works for both the LC265i-IP and the LC80i-IP. This hookup works for both the LC265i-IP and the LC80i-IP. Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com CAUTION ATTENTION RISK OF ELECTRIC SHOCK RISQUE D’ÉLECTROCUTION...
Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option, repair or replace this Product at no additional charge,...
Page 11
5601 METRO DRIVE BALTIMORE, MARYLAND 21215 800-377-7655 (US & CAN, OUTSIDE US 410-358-3600) WWW.POLKAUDIO.COM “Polk Audio,” “Dynamic Balance” and “Acoustic Resonance Control” are registered trademarks of Polk Investment Corporation used under license by Polk Audio Incorporated.