Connection Of Miele Household Appliances - iNels Connection server Installation Manual

2.3. Connection of Miele household appliances

To connect, you need to have connected Gate-wayXGW 2000 in the network which receives
information from Miele device on PowerLine, and sends it on LAN network to iMM server and
iMM clients. All devices must be on one phase. Communication on power line is enabled by all
Miele appliances that have logo miele@Connection.
Network
setting
For integration of XGW 2000 in network you need to set fixed IP address via its web
interface from te given range of your network. On web interface Miele@Connection you can
see all connected appliances. You can thus check that all appliances you use have sufficiently
strong signal for XGW 2000.
Setting the MieleGateWay IP address is recorded on iMM server in file
the basic shape is already set within the factory settings, and only the IP address XGW 2000
has to be added in between the quotation marks.
In order to display the Miele control screen, similarly as for energy management, an icon
referring to it has to be added on the Floorplan. Adding the icon is ruled by the same principles
as those advised in chapter 4.1 provided that you need to go for "Miele" option on the list of
elements. To describe the icon it is NECESSARY to keep the same name as is the name of the
room – for the appliance on the web interface (Room Name). Only appliances with the same
room name sill display which serves better arrangement in Control of Miele appliances.
Verze 02‐ 039/2011 Rev.:091013 Stránka 21 z 31
Connection Server Installation Manual
XGW 2000 network setting
Name under which
Gateway will be visible
Network settings: IP address of
Miele gateway, sub-network
mask, default gateway IP
address
DNS server IP address
/etc/imm/miele where