Booster BDVM-8360UBT Installation Manual page 27

3" true color tft widescreen
Table of Contents

Advertisement

RECEIVED LIST mode
MISSED LIST mode
PHONEBOOK mode
Download phonebook:
BDVM-8360UBT Bluetooth OPERATION
Press it will display RECEIVED LIST that the calling you have received
.Press the cursor up/down button on remote control to browse , Press
the green
ACCEPT CALL button to dial the selected number.
Press it will display MISSED LIST that the calling you have not received
.Press the cursor up/down button on remote control to browse , Press
the green
ACCEPT CALL button to dial the selected number.
NOTE: the phonebook only supports Western Characters. Any
difference in character will be shown as a x,* or #.
The screen displays contacts with names and phone numbers
downloaded from the mobile phone. Press the cursor up/down button on
the remote control to browse through the stored contacts. Press the
green
ACCEPT CALL button to dial the selected contact. Press the
red
REJECT CALL button to cancel the dialing or hang up during a
call. At a selected contact, Press the red
delete a contact, and long press this button to delete all saved contacts.
The unit will not download the phonebook from your mobile phone
automatically after being connected, you need to transfer contacts
manually.
Press and hold the SEL button more than 2 seconds on the remote
control to start pairing the phonebook, the mobile phone will be
disconnected from the unit once your pairing is started, this is a normal
operation and not a defect of the unit. Operate your mobile phone to
transfer contacts one by one, selected contacts or all contacts
(depending the possibilities of your mobile phone) to the unit, the screen
shows "Downloading" every time when receiving a contact from your
mobile phone.
Press and hold the SEL button on the remote control once again to
confirm and stop phonebook pairing.
Due to different mobile phones in the market, some phones will send first
the Last Name and then the First Name of a contact, others will send
First Name and then Last Name of a contact. The unit will display the
contacts First Name / Last Name in the way it has been send by the
mobile phone.
Note: After completing downloading the Phonebook date, due to
different mobile phones in the market, some phones may auto connect
with the unit, but some phones will not. In any case, you need to
reconnect manually to Bluetooth between your mobile phone and the
unit. ( pairing is not needed again, only connect). The easiest way to do
this, is to switch the unit off, wait for a few seconds and switch the unit on
again.
–26–
Bluetooth Operation
REJECT CALL button to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents