Booster BDVM-8360UBT Installation Manual page 26

Bluetooth Operation
LAST CALL mode
SPEED DIAL mode
DIALED LIST mode
BDVM-8360UBT Bluetooth OPERATION
number is entered, press the green
number.
Store speed dial numbers:
After inputting a phone number, long press a digit button (any of the 0-9
number) to store the phone number to this digit (10 numbers can be
saved as speed dial numbers in locations 0 to 9).
Speed dial:
Long press a digit number button in Wait Call mode to dial the stored
phone number.
Accept a call:
When a call is received, a ring tone is heard over the speakers and the
screen is indicating a call is being received, press the
button on the remote control or on the front panel to receive the call. After
the call is finished, the unit will go back to the previous mode
automatically (e.g. Radio, CD, DVD, SD, USB, AV IN).
End a call:
Press the red  REJECT CALL button to cancel the dialing or hang up
during a call.
Reject a call:
When a call is being received press the red  REJECT CALL button to
reject the call
Voice transfer:
If you prefer a private conversation instead of the Hands free calling
mode, press and hold the mode button for more than 2 seconds to
transfer the call back to your mobile phone. To transfer the call back from
the mobile phone to the Radio unit, press and hold the green  ACCEPT
CALL button for more than 2 seconds again.
Press the green  ACCEPT CALL button to redial the last number.
Press the red  REJECT CALL button to cancel the dialing or hang up
during a call.
On screen 3 stored speed dial numbers are displayed on one page, of a
total of 10 numbers. Press the cursor up/down button on remote control
to browse through the available SPEED DIAL numbers. Press the green

ACCEPT CALL button to dial the selected number. Press the red
REJECT CALL button to cancel the dialing or hang up during a call. At a
selected Speed dial number, Press the red
delete a saved number, and long press this button to delete all saved
speed dial numbers.
Press it will display DIALED LIST that you have called .Press the cursor
up/down button on remote control to browse , Press the green 
ACCEPT CALL button to dial the selected number.
–25–

ACCEPT CALL button to dial the


REJECT CALL button to
ACCEPT CALL
