Bluetooth Operation - Booster BDVM-8360UBT Installation Manual

The unit is compatible with Bluetooth international standard wireless communication technology V1.2 &
V2.0 EDR and supports HFP, A2DP, AVRCP. The working range is ± 10 meters, but the actual
connection distance depends on the working environment. Maximum 1 telephone can be connected at
one time to the unit. The unit has excellent software controlled ECHO cancellation with noise elimination
You can place a hands-free call using a Bluetooth compatible mobile phone. When you place a call,
speak loudly and clearly and shut the windows of your car before calling. Certain voices may sound
unnatural, depending on the telephone line conditions. Depending on the mobile phone in use, you may
not be able to use the hands-free phone function. Note: This unit can support most mobile phones with
Bluetooth functions such as SAMSUNG, NOKIA, PANASONIC, SHARP, MOTOROLA, PHILIPS, SONY
ERICSSON, SAGEM etc. Please refer to your mobile phone‟s user manual for Bluetooth setup and
operation.
Pairing
Auto connect
BLUETOOTH Wait
Call mode
NUMBER DIAL mode
BDVM-8360UBT Bluetooth OPERATION
Start searching a new device Bluetooth device according the manual of
your Mobile Phone. As soon as you phone finds "CAR RADIO", select
"CAR RADIO" and key in the code "0000" and confirm ok,. The Phone
and the unit will now start pairing and the device paring is finished if it
displays "Connect OK". After a Bluetooth connection is made between
the Phone and the unit, the BT indication " " will be seen in the display.
Note: When using Bluetooth for the first time with your phone and the
unit, you need to pair the devices. After you have paired the devices, you
do not need to pair it again, unless the unit has lost all of its power.
Suggestion:
1.Set "My phone's visibility" as "show to all"
2. Select "Yes" in "Set as authorized."
When the unit is powered on, the last paired mobile phone will be
connected automatically to the unit via Bluetooth if the mobile phone is in
reach and Bluetooth on the mobile phone is switched on. The Auto
connect sequence will take about one minute, if the unit cannot find the
paired mobile phone, it will stop searching after one minute. In Bluetooth
connected mode, the unit will disconnect automatically if you take your
mobile phone beyond its Bluetooth effective range (8~10 meters). When
you bring the mobile phone back near the unit, Bluetooth connection will
be restored automatically.
IN the Bluetooth mode will display "sell mode..."after correct the
Bluetooth connection is already established, you can press the MODE
button repeatedly to enter the Wait Call mode from other modes.
Press the cursor left/right buttons on remote control to enter these
Bluetooth modes: NUMBER DIAL / LAST CALL / SPEED DIAL / DIALED
LIST/RECEIVED LIST/MISSED LIST/PHONE BOOK. \
Input and dial a phone number: to enter a phone number, press the 0-9
digit buttons. For special symbols, press the * button on the remote
control to input *, long press it to input +, press # button on remote control
to input #. If you made a mistake, press the red
delete one digit at a time, long press it to delete the entire number. After a

Bluetooth Operation

–24–

REJECT CALL to