Multimedia Set Up Menu - Booster BDVM-8360UBT Installation Manual

Multimedia Set Up Menu

When in Multimedia mode, press the SETUP button on the remote control to enter the Multimedia player
setup menu to setup the Multimedia player operation setting. Press SETUP button to enter into the
system settings main menu; press the left or right arrow buttons to move to the highlighted menu item
and select one of the Setup Pages:
Press SETUP and then ENTER to enter into setup menu.
SYSTEM setup
BDVM-8360UBT Multimedia Set Up Menu
[1] TV SYSTEM:
Select this menu item to set up your preferred video output format. PAL is
commonly used in Europe, NTSC is commonly used in the USA and
Japan. Auto is commonly used.PAL60 is occasionally used.
[2] AUTO PLAY setup:
When playing a DVD disc and you can setting AUTO PLAY ON OR OFF,
[3] VIDEO setup:
Check Video out type from this menu item.
[4] TV Type:
Set TFT screen mode to the correct ratio:
Three screen ratio modes are available, Normal/PS (4:3 Pan Scan),
Normal/LB (4:3 Letterbox) and Wide (16:9). Different disc formats will
display different images depending this setting and the screen size used.
[5] Password:
The password for this unit is initially set to factory default 0000. If you
want to change your password, you need to enter the old password first
and confirm it, and enter a new password and confirm. WARNING: if you
forget your password, there is no possibility to reset the password again.
Do not forget your password and write it down or store the password in a
safe place.
[6] Rating / PARENTAL SETUP.
For DVD discs which support the USA rating system, setting up rating
control can prevent children from watching content that might not be
suitable for their age. You are asked to enter the password when you
change the rating setting. The default password is 0000.
– 18 –