Table of Contents

Advertisement

BONNET

OPENING
Proceed as follows:
❒ pull lever A-fig. 106 in the direc-
tion of the arrow;
❒ move lever B-fig. 108 in the di-
rection of the arrow;
❒ lift the bonnet and at the same
time release the rod C-fig. 107
from the catch, then fit end D of
the rod into the bonnet recess E.
IMPORTANT Before opening the
bonnet, check that windscreen wiper
arms are not lifted from the wind-
screen.
82
fig. 106
fig. 107
L0D0113m
fig. 108
The bonnet must always
be perfectly closed while
travelling for reasons of safety.
Make sure that the bonnet is per-
fectly closed and that the lock is
engaged. If you discover that the
bonnet is not perfectly closed while
travelling, stop immediately and
close the bonnet in the correct
manner.
L0C0115m
L0D0392m
WARNING

Advertisement

Table of Contents
loading

Table of Contents