Lancia Musa Owner's Handbook Manual page 59

IMPORTANT Should the system (af-
ter manual settings) be no longer able
to guarantee the required temperature
set in the passenger compartment, the
set temperature value will start flash-
ing to indicate this condition, after
one minute the AUTO message will go
out.
To restore system automatic control at
any time, after one or more manual
adjustments, press button AUTO.
58
MONO A button
(for aligning
temperature and
air distribution
settings)
Press MONO to automatically align
air temperature and distribution set-
tings in the front passenger area to
those of in the driver's area and to
therefore set both zones by turning
the knob on driver's side only. This
function is used to adjust the temper-
ature in the entire passenger com-
partment in presence of the driver
only. To go back to separate air and
temperature distribution in the two
zones of the passenger compartment,
simply turn the knobs H or press
A-MONO when the LED on the but-
ton is on.
Air recirculation
on/off button C
Air recirculation
works according to
the following operat-
ing logics:
❒ forced switching on (inside air re-
circulation always on), indicated by
the turning off of the button led C
í
and symbol on the display;
❒ function off (air recirculation al-
ways off and introduction of ex-
ternal air), indicated by the fact
that the LED on the button will go
off and symbol ê will appear on
the display.
These operating conditions are ob-
tained by pressing C in sequence.
For safety reasons, the system will au-
tomatically turn the recycle function
off to allow the introduction of fresh
air after a certain time.