Lancia Musa Owner's Handbook Manual page 33

"Temperature" unit of measure
This function is used to set the unit of
measure for temperature (°C or °F).
Proceed as follows to set the required
unit:
– briefly press MODE (°C) or (°F)
will flash on the display (according to
the previous setting);
– press button + or – for setting;
– briefly press button MODE to go
back to the menu screen or hold the
button pressed to go back to the stan-
dard screen without storing the set-
tings.
32
Selecting the language
The messages may be displayed in the
following languages: Italian, German,
English, Spanish, French, Portuguese.
To set the required language proceed
as follows:
– briefly press button MODE: the pre-
viously set "language" starts flashing
on the display;
– press button + or – for setting;
– briefly press button MODE to go
back to the menu screen or hold the
button pressed to go back to the stan-
dard screen without storing the settings.
Adjusting the failure/warning
buzzer volume (Buzzer Volume)
This function allows the volume of the
buzzer which accompanies the display
of failures / warnings to be adjusted
(8 levels). To set the desired volume,
proceed as follows:
– briefly press button MODE: the pre-
viously set volume "level" starts flash-
ing on the display;
– press button + or – to set;
– briefly press button MODE to go
back to the menu screen or hold the
button pressed to go back to the stan-
dard screen without storing the set-
tings.