Lancia Musa Owner's Handbook Manual page 152

fig. 19
DIPPED BEAM HEADLIGHTS
fig. 19-20
To change the bulb, proceed as fol-
lows:
❒ remove the protective caps;
❒ turn the bulb holder A anticlock-
wise and extract it from its seat;
❒ release the two tabs B from the
retaining devices, remove the bulb
C and replace it;
L0D0400m
fig. 20
❒ insert the bulb holder A back in
its seat and turn it clockwise.
❒ refit the protective caps correctly
after replacing.
L0D0401m
fig. 21
MAIN BEAM HEADLIGHTS
fig. 21
To change the bulb, proceed as fol-
lows:
❒ remove the protective caps;
❒ release the bulb holder clip A;
❒ disconnect the electric connector
B;
❒ remove the bulb C and replace it;
❒ fit the new bulb, ensuring that the
outline of the metal part coincides
with the grooves on the curve of the
headlight. Then reconnect the elec-
trical connector B and reattach the
bulb holder clip A;
❒ refit the protective caps correctly
after replacing.
L0D0402m
151