Canopy
Chapter 3
Install:
Connect the front canopy rod and rear canopy rod, and
tighten the connecting slip bolt ③
In the reverse order of the removal procedures.
Tightening torque for ①, ②, ⑤ :
22N·m (16.2 ft·1b)
Removal of the Pillar
Remove:
1. Fixing bolt of backrest bracket ①
2. Backrest bracket
3. Fixing bolt on the rear pillar ②
4. Fixing bolt on the rear pillar branch ③
5. Rear pillar
6. Rear pillar branch
7. Fixing bolt on the center pillar connector ④(E-4)
8. Center pillar connector
9. Fixing bolt on the center pillar ⑤(E-4)
10. Center pillar
MERGE 3-2