Tomberlin 2010 E-Merge Maintenance Manual page 134

void the warranty.
b) Securely fasten the black ring terminal from the charger to the negative terminal".",
"NEG",NEGATIVE") of the battery pack.
c) Check that the correct charge algorithm is being used –refer to section 4).Securely fasten the
red ring terminal to the positive terminal ("+","POS", "POSITIVE") of the battery pack.
Mechanical
All models
Dimensions
Weight
Environmental
Operating Temperature
Storage Temperature
AC input connector
DC output connector
Regulatory
Safety
EN 60335-1/2-29
UL2202
UL1564 2nd Edition
CSA-C22.2 No.107-2
Emissions
FCC Part 15/ICES 003
EN 55011
EN 61000-3-2
EN 61000-3-3
Immunity
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-11
Battery and Charger
28.0*24.5*11.0cm(11*9.7*4.3)"
<5kg(<11lbs) w/ standard output cord
Enclosure:IP46
℃ ℃ -22 to 122 ),
-30 to +50 (
℃
Above 30 ,below 0
℃ ℃ -40
-40 to +70 (
IEC320/C14(require>=1.8m localized cord)
OEM specific w/ 12AWG wire
Safely of Appliances/Battery Chargers
EV Charging System Equipment
Industrial Battery Charger
Battery Chargers-Industrial
Unintentional Radiators Class A
Radio disturbance characteristics(Class A)
Limits for harmonic current emissions
Limits of voltage fluctuations and flicker
Electrostatic discharge immunity
Radiated, radio -frequency, EMF immunity
Electrical fast transient/burst immunity
Surge immunity
Conducted Immunity
Voltage variations immunity
MERGE 11-27
Chapter 11
℉ ℉ derated
℃
℉ ℉
to 158 )