Chapter 3 Canopy; Removal Of The Canopy; Remove; Install - Tomberlin 2010 E-Merge Maintenance Manual

Canopy
Chapter 3

Removal of the Canopy

Remove:

1． Disconnect high－mounted center light wire
2． Fixing bolts of the canopy
3． Canopy

Install:

Canopy
In the reverse order of the removal procedures
Tightening torque：
9N·m (6.6ft·1b)

Removal of Canopy Rods

Remove:

1． Fixing bolt on the rear pillar ①
2． Fixing bolt on the center pillar ②（E-4）
3． Install slip bolt ③
4． Canopy rod ④
5． Fixing bolt of front canopy rod ⑤
6． Front canopy rod ⑥
MERGE 3-1