Table of Contents
Advertisement
Wrong stitch, irregular or narrow stitches?
• Cancel twin needle safety and/or straight stitch
safety.
• Turn machine off and on to reset.
• Change needle; re-thread top and bobbin.
• Use stabilizer.
Presser foot will not go down?
• Turn the machine off and on.
• Set Sensor Foot lift on auto in Set Menu.
Interactive Designer Screen contrast is dark
(or light?)
• Change screen contrast in Set Menu.
Interactive Designer Screen is off?
• Touch screen.
• Cancel screen saver in Set Menu.
• Turn machine off and on to reset.
Buttons on Interactive Designer Screen are
not activated when touched?
• Calibrate the Interactive Designer Screen. See
instructions on page 1-27.
Machine sews slowly?
• Check speed.
• Remove stitch plate and brush lint from
bob bin and teeth area.
• Have machine serviced at your retailer.
Machine will not sew?
• Check power and foot control plugs are
properly plugged into machine.
• Check wall plug and power to wall plug.
Embroidery puckers?
• Use correct stabilizer – see Accessory User's
Gui de.
• Hoop fabric tightly – see page 3-4.
Machine will not embroider?
• Push embroidery unit fi rmly into machine socket.
• Slide on hoop.
SE! Light
The long lasting diodes of the SE! Light do not
need to be replaced. If you experience problems
with your SE! Light, take your Designer SE to
your retailer.
6-4
Care of your Designer SE
Have your Designer SE serviced regularly by
your Husqvarna Viking retailer.
If you have followed this trouble shooting
in for ma tion and still are having sewing or
embroidery problems, take it to your retailer. If
there is a specifi c problem, it is a gre at help to test
sew with your thread on a scrap of your sewing
fabric. A sewing sample will often give much
better information than words to the technician.
Non-original Parts and Accessories
The Designer SE warranty does not cover any
defect or dam age caused by use of non-ori gi nal
ac ces so ries or parts.
How to update Designer SE
All information in this Husqvarna Viking
Designer SE User's Guide is current at the time
of printing.
We constantly receive feedback from Designer SE
owners and retailers and use this in for ma tion to
produce updates and upgrades.
Updating instructions
• Install the CD Designer SE 3D Embroidery
Software – 3D QuickFont, 3D Organizer and
Computer Connection – which is delivered
with your Designer SE.
• Open the program 3D Confi gure and touch
the button Smart Update.
• Follow the instructions.
: When installing the CD Designer SE 3D
NOTE
Embroidery Software you will be asked to register
your Designer SE. To be able to update, your
Designer SE must be registered. You can register
online or by printing out the registration form and
mailing it in.
Be sure to consult the web site at
www.husqvarnaviking.com and/or your local
Husqvarna Viking retailer often for updates and
upgrades to your Designer SE and User's Guide.
Advertisement
Table of Contents
