Table of Contents
Advertisement
Interactive Designer
Embroidery
Touch the toggle button at the bottom of
the screen when your design is ready. New
functions, used when stitching out a design, are
displayed.
Cursor
When embroidering, a cursor + indicates the
needle position in the design. The cursor follows
the needle through the design when sewing or
when stepping through stitches or colors, so you
can always see on screen your exact position in
the design.
Step Stitch-by-Stitch
Use + and − to step through the design stitch-by-
stitch. Touch − to step backward a few stitches
if the top thread has run out or broken. Touch
and hold to step faster through the stitches.
The needle position is indicated by the + in the
embroidery area.
Above this button there is a window showing
the current stitch number and the total number
of stitches in the color.
Step by Color
Use + and − to step to the fi rst stitch of the
previous or next color. Above the button you
see the current design and color number.
Thread Tension
When embroidering with specialty threads or on
very thin or thick fabric, touch + or − to adjust
the thread tension if needed.
Embroidery Mode
Check Size and Placement
Moves the hoop position so the needle moves
to all four corners of the loaded design(s) to
outline the size and placement. The fi rst touch
brings the needle to the upper left corner of the
total design area. The button changes so that the
arrow corresponding to each corner is marked
white. Each touch brings the hoop to one of the
corners. The fi fth touch brings the hoop back to
the original center position.
The check size function also shows where the
design will be sewn on the fabric. This makes
it easier to position designs when embroidering
several designs in succession.
4-13
Advertisement
Table of Contents
