The Rear Ports
6
Figure 2
Port
Power Switch Power ON/OFF switch
1
PWR
2
3
RESET
LAN
1X — 4X
4
(RJ-45
connector)
CONSOLE
5
LINE
6
5
Connect the supplied power adapter to this jack.
The moment the device is powered on, press it to reset the device
or restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps. You may use a straight or a crossover cable.
Console port is used for technical support purpose only.
(Do not use unless requested to do so by Telkom)
Connect the protected ("out") RJ-11 plug of the integrated surge
and power unit into this jack.
4
Meaning
Telkom ADSL 5100
1
3
2
3