Table of Contents
Advertisement
Quick Start Guide
Telkom ADSL 5100 utility (Figure 5)
After you have entered your details, click on "OK". The router will now be updated
with your ISP details. To complete this step just click "OK" when the utility has
finished and the utility will disappear by itself, once again returning you to the menu
screen.
12
The "Login Info" section of the utility form, houses the information
that enables you to access your router. If you have changed either
your router's IP address and/or administrative username and
password, you will need to enter the new information here before
you click OK.
The utility will open with all the fields preset to Telkom's default
settings for when using a routed connection. Should you require
different settings and/or a bridged connection then select
"Manual Configuration" in the "Country" field to make all the
fields editable. Note, that this function is only for advanced
users and is not for a standard setup. Please consult the
manual for further information.
You may run the Telkom ADSL 5100 utility again, at any
later stage, by selecting it from your Programs list under
the windows start menu.
If the utility does not seem to respond, please refer to the
troubleshooting section.
Advertisement
Table of Contents
