NOMAD 2 UNIVERSAL CONTROLLER REAR VIEW
Power Connector
Power Connector: Is used to connect the 12 VDC 4 AMP power supply to provide power to the
NOMAD 2 Universal Controller. (Note: Only use the power supply provided by MotoSAT.)
Control Cable: Connects the mount by way of a 9 pin conductor cable to the NOMAD 2 Universal
Controller. The cable is color coordinated for exact connection configuration. (See Figure Below)
Black-Brown-Red-Orange-Yellow-Green-Blue-White-Purple
(Purple is only used on Skewable Mounts, and not required on Non-Skewable Mounts)
Control Cable
Maintenance Port
P1
P2
P3
+12V -GND Unused
Wiring to 9 Pin Control Connector
To Satellite Receiver
Satellite In
8
From Dish