MotoSAT Nomad 2 User Manual page 25

• If done correctly, the following screen will appear:
• At the local> prompt, type fbulk and press the ENTER key.
• YOU WILL RECEIVE THE local> PROMPT BACK
• At the local> prompt, type fload and press the ENTER key.
• YOU WILL NOT RECEIVE THE local> PROMPT THIS TIME
• You can now send software to the Nomad for updating. On the HyperTerminal window click
TRANSFER, then click SEND TEXT FILE.
• Browse for the Nomad file you wish to send to the Nomad controller. Usually it can be found on
your DESKTOP, or in MY DOCUMENTS.
25