Settings Set Am/Pm Or 24 Clock; Settings: Set Temperature Unit; Settings: Screen Contrast Level - Pentair INTELLIFLO VS+SVRS Installation And User Manual

11
Settings: Set AM/PM or 24 Clock
This setting is for changing the IntelliFlo
a 24 hour clock. For example, Midnight (12:00 AM) is 0000 hr., 8:00 AM is 0800 hr., and 11:00 PM is
2300 hr.
To access the AM/PM or 24 hr. menu:
1. Check that the green power LED is on.
2. Press the Menu button. "Settings" is displayed.
3. Press the Select button. "Pump Address" is displayed.
4. Use the Up or Down arrow button to scroll to "AM/PM."
5. Press the Select button to change the setting.
6. Press Up or Down arrow button to choose between 24 hr and AM/PM.
7. Press the Enter button to save the setting. To cancel any changes, press the Escape button to
exit edit mode without saving.
8. Press the Escape button to exit.

Settings: Set Temperature Unit

Use this setting to set the temperature unit to Celsius (°C), or Fahrenheit (°F). The pump's Anti Freeze
protection feature (see page 21) can be set to either Fahrenheit or Celsius.
To access the Temperature Units menu:
1. Check that the green power LED is on.
2. Press the Menu button. "Settings" is displayed.
3. Press the Select button. "Pump Address" is displayed.
4. Use the Up or Down arrow button to scroll to "Temperature Units" menu item. The Factory
default setting is "F" (Fahrenheit).
5. Press the Select button. "F" is displayed.
6. Press Up or Down arrow button to choose between Celsius (°C), or Fahrenheit (°F).
7. Press the Enter button to save the setting. To cancel any changes, press the Escape button to
exit edit mode without saving.
8. Press the Escape button to exit.

Settings: Screen Contrast Level

This setting changes the contrast of the LCD screen. The default setting is 3. Screen contrast levels can
be adjusted from 1 to 5 units for low or high lighting conditions.
To access the Temperature Units menu:
1. Check that the green power LED is on.
2. Press the Menu button. "Settings" is displayed.
3. Press the Select button. "Pump Address" is displayed.
4. Use the Up or Down arrow to scroll to "Contrast level.
5. Press the Select button. Screen will show current contrast setting number. The default is
"3".
6. Press the Select button to change the setting. Number will highlight.
7. Press the Enter button to save the setting. To cancel any changes, press the Escape button to
exit edit mode without saving.
8. Press the Escape button to exit.
INTELLIFLO VS+SVRS and INTELLIPRO
®
VS+SVRS Pump's time clock from regular time (AM/PM) to
®
VS+SVRS Variable Speed Pump Installation and User's Guide
®