Venting - Valor Vogue 1300ILN Installation & Owner's Manual

Vent Material
This unit is approved for installation using 4 x 6-5/8 in
co-axial direct vent pipe and accessories as listed in
the Approved Venting Components table on pages
44–45 of this manual. Follow the installation instruc-
tions supplied with the individual venting accessories.
This unit may also be converted to co-linear (2 x 3 in)
venting for use in solid-fuel burning fi replaces and
chimneys using adapters and accessories—see the
Approved Venting Components table on pages 44–45
of this manual.
Wall Thickness
The appliance vent is suitable for penetrating a com-
bustible wall assembly up to 8 inches in thickness. A
non-combustible wall can be of any thickness up to the
maximum horizontal run of vent pipe allowed for the
particular installation.

Venting

Framing Vent in Combustible Walls &
Ceilings
When penetrating through combustible walls and
ceilings, frame a minimum of 10 in x 10 in opening and
ensure that the insulation is kept clear of the vent pipe
using either a wall thimble or an attic insulation shield.
Follow the installation instructions supplied with the
individual venting components.
Align the vent
center to the
center of the frame
INSTALLATION
10" (254 mm)
10" (254 mm)
15