Lcd Display; Functions Settings; Initialization; Enter Settings - Konlen MOBILE CALL GSM Alarm System User Manual

LCD display:

Functions Settings

1. Initialization

Please insert SIM card and plug in power adaptor, and then power on the
system, all the LED lights will be on for 2 seconds and you will hear a long
beep; the system comes into initialization. After the time clock displays on
the LCD screen, the [GSM] starts flashing and the main unit starts to detect
the GSM network until a long beep.
Then the [GSM] indicator goes out indicating the system comes into disarm
status.
Finally, turn on the backup battery switch.

2. Enter Settings

In the state of disarm, input 4-digit password by the keypad on the main
unit and press [ # ] button to confirm. You will hear a voice prompt: please
enter instruction. At the same time, [ SET ] indicator is on without flashing
and [ 0000 ] displays on the screen, indicating the system enters setting status.
You can perform different settings repeatedly as long as the system keeps in
setting status. The system will exit setting mode and return to disarm status
if you don't press any keypad button for 40 seconds.
4
Functions Settings

Alarm Host Diagram