Voice Recording; Siren Setting - Konlen MOBILE CALL GSM Alarm System User Manual

18. Voice Recording

In setup state, use keypad to input [701], and then press [#] to confirm.
The main unit will emit a beep and the [
seconds countdown, recording starts: record at 30cm away from the
main unit with moderate tone; 10 seconds later, the main unit will make
a beep indicating the recording stops and the recorded voice will replay.
Operating method: [701] [#]
LCD display:

19. Siren Setting

In setup state, use keypad to input [75]; in the operation of arm/ disarm
by remote control, select if the siren sounds or not by [0/1] button, and
then press [#] to confirm. The main unit will emit a long beep and a
voice prompt "setting completed".
Operating method: [75] [A] [#]
A indicates: [0] Siren off; [1] Siren on; System default: [0] Siren off
For example: set siren on when arm/ disarm
Operating method: [75] [1] [#]
LCD display:
20. Siren Setting in "Emergency Help" mode
In setup state, use keypad to input [76], and then [1/0], finally press [#]
to confirm. The main unit will make a long beep and a voice prompt
"setting completed".
Operating method: [76] [A] [#]
A indicates:
[0]: siren off in "Emergency Help" mode
[1]: siren on in "Emergency Help" mode
System default: [0] siren off
14
Functions Settings
Functions Settings
] indicator is on, and after 10